• Before you begin the treatment please discontinue all hair removal methods in the treatment area EXCEPT for shaving – including waxing, hair removal creams or chemicals, tweezing and electrolysis. Make sure you shave the area the day before the treatment. Always remember to do a patch test before you begin treatment.
• We recommend you treat the area once a week for 12 weeks to catch all the unwanted hair.
• Switch to maintenance treatments and top-up every 4-8 weeks to remain hair-free.

• Max optical output: 4J/cm2
• Treatment window (inches): 2 x 0.4 inches
• UV filter built-in
• Optical power: 18 watts
• Intensity settings: 1
• Treatment modes: 1 – Power
• Wavelength: 510 – 1100nm
• Pulse Length: 0.5 -1.0ms
• Flashes: 120 flashes per minute
• Device handset dimensions (L x W x H inches): 6.7 x 2.8 x 3
• Device weight (lbs): 0.4
• Power pack dimensions (L x W x H inches): 6.2 x 2.8 x 1.2
• Power pack weight (lbs): 0.7
• Boxed dimensions (L x W x H inches): 11 x 6.7 x 4.3
• Boxed weight (Ibs): 2.2

IPL is not suitable for you if:

• You are pregnant or lactating
• You have a history of skin cancer of pre-cancerous lesions
• You skin tone & hair color combination does not match the safe & effective range shown on our suitability charts

IPL cannot be used on areas of the body where you have:

• Tattoos or permanent makeup
• Botox or fillers
• Dark brown or black spots including birthmarks, moles, and freckles
• A rash, broken skin, a scab, or a healed wound

Tanning & sunburn

• Wait at least 2 days after tanning before you use SmoothSkin
• Do not use SmoothSkin if you have sunburned skin and for as long as the sunburn persists

Bare+ uses IPL (intense pulse light) to help break the cycle of hair growth without damaging the skin. Light energy from the device is transferred through the skin’s surface and is absorbed by melanin present in the hair shaft. The absorbed light energy is converted to heat energy (below the surface of the skin), which disables the hair follicle preventing further growth.

Treated hairs naturally fall out over a period which can vary from a few days to 1-2 weeks depending on the individual. Repeat treatment once a week for 12 weeks. After this, treat when desired, typically 2 to 4 weeks to keep your skin hair-free.

You can see visible results in as little 4 weeks with Bare+, depending on your own hair growth cycle. It may take some users a little longer to achieve results, we recommend following the treatment regime for at least 12 weeks.

Our devices have been developed with safety at the forefront and are safe to use without the need for eye protection. All our devices have 4 skin contact sensors that ensure the device flashes only when pressed firmly against your skin, never into the air. However, you should never attempt to fire on to or close to the eye itself.

Yes. Our devices are FDA cleared and have been clinically proven to be safe and effective, with over 5,500 treatments performed in clinical trials on different skin tones.

Bare+ features a skin tone sensor that automatically reads your skin tone before every flash ensuring the device flashes only if safe. You will never burn your skin. Our advanced UV filter protects your skin by preventing damaging light to reach your skin with a 3mm glass UV filter.