• Before you begin the treatment please discontinue all hair removal methods in the treatment area EXCEPT for shaving – including waxing, hair removal creams or chemicals, tweezing and electrolysis. Make sure you shave the area the day before the treatment. Always remember to do a patch test 24 hours before starting treatment.
• We recommend you treat the area once a week for 12 weeks to catch all the unwanted hair.
• Switch to maintenance treatments and top-up every 4-8 weeks to remain hair-free.

• Max optical output: 3- 6J/cm2
• Treatment window (inches): 1.2 x 0.4
• UV filter built-in
• Optical power: 20 watts
• Intensity settings: 10
• Treatment modes: 2 – Glide & Stamp
• Comfort modes: 3 – Power, Gentle, Speed
• Wavelength: 510 – 1100nm
• Pulse Length: 2.5 +-0.5ms
• Flashes: 66 -122 flashes per minute
• Device handset dimensions (L x W x H inches): 9.3 x 2.8 x 2
• Device weight (lbs): 0.7
• Power pack dimensions (L x W x H inches): 6.2 x 2.8 x 1.2
• Power pack weight (lbs): 0.7
• Boxed dimensions (L x W x H inches): 11.3 x 6.4 x 4.3
• Boxed weight (Ibs): 2.3

IPL is not suitable for you if:

• You are pregnant or lactating
• You have a history of skin cancer of pre-cancerous lesions
• You skin tone & hair color combination does not match the safe & effective range shown on our suitability charts

IPL cannot be used on areas of the body where you have:

• Tattoos or permanent makeup
• Botox or fillers
• Dark brown or black spots including birthmarks, moles, and freckles
• A rash, broken skin, a scab, or a healed wound

Tanning & sunburn

• Do not use if your skin has been artificially or naturally tanned or is burned from sun overexposure as your skin may be extra sensitive.
• Wait 1 week until sunburn or tan disappears before using SmoothSkin

Pure Adapt uses IPL (intense pulse light) to help break the cycle of hair growth without damaging the skin. Light energy from the device is transferred through the skin’s surface and is absorbed by melanin present in the hair shaft. The absorbed light energy is converted to heat energy (below the surface of the skin), which disables the hair follicle preventing further growth. Treated hairs naturally fall out over a period which can vary from a few days to 1-2 weeks depending on the individual. Repeat treatment once a week for 12 weeks. After this, treat when desired, (typically 4 to 8 weeks) to keep your skin hair-free.

Pure Adapt uses IPL (intense pulse light) to help break the cycle of hair growth without damaging the skin. Light energy from the device is transferred through the skin’s surface and is absorbed by melanin present in the hair shaft. The absorbed light energy is converted to heat energy (below the surface of the skin), which disables the hair follicle preventing further growth. Treated hairs naturally fall out over a period which can vary from a few days to 1-2 weeks depending on the individual. Repeat treatment once a week for 12 weeks. After this, treat when desired, (typically 4 to 8 weeks) to keep your skin hair-free.

Your skin tone varies across your body and so should the intensity level of your IPL device. Our intelligent skin tone sensor continuously reads your skin tone and automatically optimizes the intensity of every flash to your unique skin tone giving you the most effective yet safe results. No need for you to guess what the optimal energy level is, Pure Adapt does it for you. If the intelligent skin tone sensor detects a skin tone that is unsafe for IPL, the device won’t flash.

In the first few weeks of treatment, you will still see some hairs growing, this is totally normal. From around 2 weeks, you should be seeing a reduction in hair regrowth. There will still be some hairs that need treating but hairs will grow back fewer and softer. From 4 weeks, hair grows back lighter and thinner. After 8 weeks, hair regrowth slows down significantly and after 12 weeks, you can achieve up to 99% hair reduction.

Our devices have been developed with safety at the forefront and are safe to use without the need for eye protection. All our devices have 4 skin contact sensors that ensure the device flashes only when pressed firmly against your skin, never into the air. However, you should never attempt to fire on to or close to the eye itself.